======Overview======
Second way to create FS is directly using the physical partition. Of course the drawback of this method is that you have you use the entire physical partition, rather than the logical partition.


====Procedures====
===Identify physical Volume====
<sxh bash>
[root@auxserver ~]# fdisk -l

Disk /dev/sda: 8589 MB, 8589934592 bytes, 16777216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000cd5a4

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048     2099199     1048576   83  Linux
/dev/sda2         2099200    16777215     7339008   8e  Linux LVM

Disk /dev/sdb: 8589 MB, 8589934592 bytes, 16777216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

</sxh>

===Partition the volume===
<sxh bash>
[root@auxserver ~]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x78096ac4.

Command (m for help): n
Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-16777215, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-16777215, default 16777215):
Using default value 16777215
Partition 1 of type Linux and of size 8 GiB is set

Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.

</sxh>

===Create file system on this partition===
<sxh bash>
[root@auxserver ~]# mkfs.ext
mkfs.ext2  mkfs.ext3  mkfs.ext4
[root@auxserver ~]# mkfs.ext4 /dev/sdb1
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
524288 inodes, 2096896 blocks
104844 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2147483648
</sxh>

===Edit the /etc/fstab===
Edit the /etc/fstab to add new configuration:

<sxh bash>
[root@auxserver ~]# tail -100f /etc/fstab
#
# /etc/fstab
# Created by anaconda on Mon Jan 15 05:54:00 2018
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/centos-root /                       xfs     defaults        0 0
UUID=9350c1d9-7aa7-4267-a4e7-1607ef9e1465 /boot                   xfs     defaults        0 0
/dev/mapper/centos-swap swap                    swap    defaults        0 0
/dev/sdb1 /newFS ext4 defaults 0 0
</sxh>


===Mount the FS===
Mount the FS if it isn't already mounted:

<sxh bash>
[root@auxserver ~]# mount /newFS
mount: /dev/sdb1 is already mounted or /newFS busy
       /dev/sdb1 is already mounted on /newFS
[root@auxserver ~]#
</sxh>