This is an old revision of the document!
Overview
PGPool-II is open source package which provides a lot of features for PostgreSQL like:
- Load balancing
- Session management
- Automatic failover
- Others
In a nutshell, the PGPool is external program which connects to the master and the slave(s) and is able to detect when the master is down, which query needs only read and which query needs also write. Thus directing some sessions to the slaves and others to the master.
Below you can see basic architecture:
From the architecture it is visible that the PGPool-II assigns a Virtual IP (VIP) which the client (application) will user. In case the master server fails, that VIP will be migrated to the other server, thus “failing over” and “failover command” will be needed.
So, what are we waiting for. Let's use our configuration which we already have.
Master
- postgresqlmaster - 192.168.0.178
Slaves
- postgresqlslaveone - 192.168.0.199
- postgresqlslavetwo - 192.168.0.200
This is the configuration which we've done with you in the previous sections. Now I will setup a new VM for the pgpool-II
pgPool
- postgresqlpgpool VIP - 192.168.0.220
Setup
PGpool has a current stable version of 4.1. So let's use that one.
We have Linux 7 so we can download the rpm from here Once we download it, we have download one more package
Download Packages
Let's tart by downloading the packages on the VM (PostgresqlPGPool) We need 2 additional packages except the PGPool:
- libevent
- libmemcached
Using username "root". Last login: Thu Jan 23 10:06:12 2020 [root@postgresqlslaveone ~]# wget http://www6.atomicorp.com/channels/atomic/centos/7/x86_64/RPMS/libmemcached-1.0.18-1.el7.art.x86_64.rpm --2020-01-23 10:07:52-- http://www6.atomicorp.com/channels/atomic/centos/7/x86_64/RPMS/libmemcached-1.0.18-1.el7.art.x86_64.rpm Resolving www6.atomicorp.com (www6.atomicorp.com)... 51.79.80.20 Connecting to www6.atomicorp.com (www6.atomicorp.com)|51.79.80.20|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 247408 (242K) [application/x-rpm] Saving to: ‘libmemcached-1.0.18-1.el7.art.x86_64.rpm’ 100%[=================================================================================================================================================================================>] 247,408 177KB/s in 1.4s 2020-01-23 10:07:54 (177 KB/s) - ‘libmemcached-1.0.18-1.el7.art.x86_64.rpm’ saved [247408/247408] [root@postgresqlslaveone ~]# wget https://www.pgpool.net/yum/rpms/4.1/redhat/rhel-7-x86_64/pgpool-II-pg10-4.1.0-2pgdg.rhel7.x86_64.rpm --2020-01-23 10:08:00-- https://www.pgpool.net/yum/rpms/4.1/redhat/rhel-7-x86_64/pgpool-II-pg10-4.1.0-2pgdg.rhel7.x86_64.rpm Resolving www.pgpool.net (www.pgpool.net)... 202.32.10.40 Connecting to www.pgpool.net (www.pgpool.net)|202.32.10.40|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1409060 (1.3M) [application/x-rpm] Saving to: ‘pgpool-II-pg10-4.1.0-2pgdg.rhel7.x86_64.rpm’ 100%[=================================================================================================================================================================================>] 1,409,060 130KB/s in 12s 2020-01-23 10:08:13 (113 KB/s) - ‘pgpool-II-pg10-4.1.0-2pgdg.rhel7.x86_64.rpm’ saved [1409060/1409060] [root@postgresqlslaveone ~]#
After that we can install them
Install packages
[root@postgresqlslaveone ~]# yum install libevent Loaded plugins: fastestmirror, langpacks Loading mirror speeds from cached hostfile * base: ftp.cvut.cz * extras: ftp.cvut.cz * updates: ftp.cvut.cz base | 3.6 kB 00:00:00 extras | 2.9 kB 00:00:00 pgdg10 | 3.6 kB 00:00:00 pgdg11 | 3.6 kB 00:00:00 pgdg94 | 3.6 kB 00:00:00 pgdg95 | 3.6 kB 00:00:00 pgdg96 | 3.6 kB 00:00:00 updates | 2.9 kB 00:00:00 Resolving Dependencies --> Running transaction check ---> Package libevent.x86_64 0:2.0.21-4.el7 will be installed --> Finished Dependency Resolution Dependencies Resolved =========================================================================================================================================================================================================================== Package Arch Version Repository Size =========================================================================================================================================================================================================================== Installing: libevent x86_64 2.0.21-4.el7 base 214 k Transaction Summary =========================================================================================================================================================================================================================== Install 1 Package Total download size: 214 k Installed size: 725 k Is this ok [y/d/N]: y Downloading packages: libevent-2.0.21-4.el7.x86_64.rpm | 214 kB 00:00:00 Running transaction check Running transaction test Transaction test succeeded Running transaction Installing : libevent-2.0.21-4.el7.x86_64 1/1 Verifying : libevent-2.0.21-4.el7.x86_64 1/1 Installed: libevent.x86_64 0:2.0.21-4.el7 Complete! [root@postgresqlslaveone ~]# rpm -Uvh libmemcached-1.0.18-1.el7.art.x86_64.rpm warning: libmemcached-1.0.18-1.el7.art.x86_64.rpm: Header V3 RSA/SHA1 Signature, key ID 4520afa9: NOKEY Preparing... ################################# [100%] Updating / installing... 1:libmemcached-1.0.18-1.el7.art ################################# [100%] [root@postgresqlslaveone ~]# rpm -Uvh pgpool-II-pg10-4.1.0-2pgdg.rhel7.x86_64.rpm warning: pgpool-II-pg10-4.1.0-2pgdg.rhel7.x86_64.rpm: Header V4 RSA/SHA1 Signature, key ID 60ae0e48: NOKEY Preparing... ################################# [100%] Updating / installing... 1:pgpool-II-pg10-4.1.0-2pgdg.rhel7 ################################# [100%] postgres ALL=NOPASSWD: /sbin/ip postgres ALL=NOPASSWD: /usr/sbin/arping [root@postgresqlslaveone ~]#
After that we could finally install the PGPool as you can see above.
Configuration
Now we start with the interesting part :)
Firstly,we have to do passwordless connection between all servers for root and postgresql users:
Configure passwordless Connection
Allow passwordless connection for: root and postgres users
[all servers]# cd ~/.ssh [all servers]# ssh-keygen -t rsa [all servers]# ssh-copy-id -i id_rsa.pub root@postgresqlpgpool [all servers]# ssh-copy-id -i id_rsa.pub root@postgresqlmaster [all servers]# ssh-copy-id -i id_rsa.pub rootgres@postgresqlslaveone [all servers]# ssh-copy-id -i id_rsa.pub rootgres@postgresqlslavetwo [all servers]# su - postgres [all servers]$ cd ~/.ssh [all servers]$ ssh-keygen -t rsa [all servers]$ ssh-copy-id -i id_rsa.pub postgres@postgresqlpgpool [all servers]# ssh-copy-id -i id_rsa.pub postgres@postgresqlmaster [all servers]$ ssh-copy-id -i id_rsa.pub postgres@postgresqlslaveone [all servers]$ ssh-copy-id -i id_rsa.pub postgres@postgresqlslavetwo
Because of the security reasons, we create a user repl solely used for replication purpose, and a user pgpool for streaming replication delay check and health check of Pgpool-II.
Create user on the Master
[postgresqlmaster]# psql -U postgres -p 5432 postgres=# SET password_encryption = 'scram-sha-256'; postgres=# CREATE ROLE pgpool WITH LOGIN; postgres=# \password pgpool postgres=# \password postgres
Then we have to configure the settings, which will be common for all servers:
Configure Common settings
Common settings in pgpool.conf
listen_addresses = '*' sr_check_user = 'pgpool' sr_check_password = '' health_check_period = 5 health_check_timeout = 30 health_check_user = 'pgpool' health_check_password = '' health_check_max_retries = 3 backend_hostname0 = 'postgresqlmaster' backend_port0 = 5432 backend_weight0 = 1 backend_data_directory0 = '/var/lib/pgsql/10/data' backend_flag0 = 'ALLOW_TO_FAILOVER' backend_hostname1 = 'postgresqlslaveone' backend_port1 = 5432 backend_weight1 = 1 backend_data_directory1 = '/var/lib/pgsql/10/data' backend_flag1 = 'ALLOW_TO_FAILOVER' backend_hostname2 = 'postgresqlslavetwo' backend_port2 = 5432 backend_weight2 = 1 backend_data_directory2 = '/var/lib/pgsql/10/data' backend_flag2 = 'ALLOW_TO_FAILOVER' backend_application_name0 = 'postgresqlmaster' backend_application_name1 = 'postgresqlslaveone' backend_application_name2 = 'postgresqlslavetwo' failover_command = '/etc/pgpool-II/failover.sh %d %h %p %D %m %H %M %P %r %R %N %S' follow_master_command = '/etc/pgpool-II/follow_master.sh %d %h %p %D %m %M %H %P %r %R' recovery_user = 'postgres' recovery_password = '' recovery_1st_stage_command = 'recovery_1st_stage' enable_pool_hba = on use_watchdog = on delegate_IP = '192.168.0.220' if_up_cmd = '/usr/bin/sudo /sbin/ip addr add $_IP_$/24 dev enp0s3 label enp0s3:0' if_down_cmd = '/usr/bin/sudo /sbin/ip addr del $_IP_$/24 dev enp0s3' arping_cmd = '/usr/bin/sudo /usr/sbin/arping -U $_IP_$ -w 1 -I enp0s3' if_cmd_path = '/sbin' arping_path = '/usr/sbin' log_destination = 'syslog' # Where to log # Valid values are combinations of stderr, # and syslog. Default to stderr. syslog_facility = 'LOCAL1' # Syslog local facility. Default to LOCAL0
These values will be valid for all servers and now we have to specify the specific settings per host. These configurations include: Watch dog, healtcheck and others:
Configure Individual settings
PostgreSQLMaster settings
wd_hostname = 'postgresqlmaster' wd_port = 9000 # - Other pgpool Connection Settings - other_pgpool_hostname0 = 'postgresqlslaveone' # Host name or IP address to connect to for other pgpool 0 # (change requires restart) other_pgpool_port0 = 9999 # Port number for other pgpool 0 # (change requires restart) other_wd_port0 = 9000 # Port number for other watchdog 0 # (change requires restart) other_pgpool_hostname1 = 'postgresqlslavetwo' other_pgpool_port1 = 9999 other_wd_port1 = 9000 heartbeat_destination0 = 'postgresqlslaveone' heartbeat_destination_port0 = 9694 heartbeat_device0 = '' heartbeat_destination1 = 'postgresqlslavetwo' heartbeat_destination_port1 = 9694 heartbeat_device1 = ''
PostgreSQLSlaveOne settings
wd_hostname = 'postgresqlslaveone' wd_port = 9000 # - Other pgpool Connection Settings - other_pgpool_hostname0 = 'postgresqlmaster' # Host name or IP address to connect to for other pgpool 0 # (change requires restart) other_pgpool_port0 = 9999 # Port number for other pgpool 0 # (change requires restart) other_wd_port0 = 9000 # Port number for other watchdog 0 # (change requires restart) other_pgpool_hostname1 = 'postgresqlslavetwo' other_pgpool_port1 = 9999 other_wd_port1 = 9000 heartbeat_destination0 = 'postgresqlmaster' heartbeat_destination_port0 = 9694 heartbeat_device0 = '' heartbeat_destination1 = 'postgresqlslavetwo' heartbeat_destination_port1 = 9694 heartbeat_device1 = ''
PostgreSQLSLaveTwo settings
wd_hostname = 'postgresqlslavetwo' wd_port = 9000 # - Other pgpool Connection Settings - other_pgpool_hostname0 = 'postgresqlmaster' # Host name or IP address to connect to for other pgpool 0 # (change requires restart) other_pgpool_port0 = 9999 # Port number for other pgpool 0 # (change requires restart) other_wd_port0 = 9000 # Port number for other watchdog 0 # (change requires restart) other_pgpool_hostname1 = 'postgresqlslaveone' other_pgpool_port1 = 9999 other_wd_port1 = 9000 heartbeat_destination0 = 'postgresqlmaster' heartbeat_destination_port0 = 9694 heartbeat_device0 = '' heartbeat_destination1 = 'postgresqlslaveone' heartbeat_destination_port1 = 9694 heartbeat_device1 = ''
All these settings are specified in the pgpool.conf file in /etc/pgpool-II After that is done, let's create the log destination:
Create log destination
[all servers]# mkdir /var/log/pgpool-II [all servers]# touch /var/log/pgpool-II/pgpool.log [all servers]# echo "LOCAL1.* /var/log/pgpool-II/pgpool.log" >> /etc/rsyslog.conf [all servers]# vi /etc/logrotate.d/syslog ... /var/log/messages /var/log/pgpool-II/pgpool.log /var/log/secure [all servers]# systemctl restart rsyslog
PCP Config
Since user authentication is required to use the PCP command, specify user name and md5 encrypted password in pcp.conf. Here we create the encrypted password for pgpool user, and add “username:encrypted password” in /etc/pgpool-II/pcp.conf.
PCP password
[all servers]# echo 'pgpool:'`pg_md5 PCP_passowrd` >> /etc/pgpool-II/pcp.conf
Since follow_master_command script has to execute PCP command without entering the password, we create .pcppass in the home directory of Pgpool-II startup user (root user).
[all servers]# echo 'localhost:9898:pgpool:pgpool' > ~/.pcppass [all servers]# chmod 600 ~/.pcppass
Allow access
In PGpool 4.0+ the only available password which can be used is either: AES encrypter or clear text. it is obvious to note that it isn't advised to use clear text password.
So we have to:
- Modify: pg_hba.conf and pool_hba.conf
- Encrypt our password
- Store the decryption key in the process owner home on all servers
To modify the pg_hba.conf and pool_hba.conf, you can use any text editor you want, but you should follow the syntax:
Edit hba conf files
host all pgpool 0.0.0.0/0 scram-sha-256 host all postgres 0.0.0.0/0 scram-sha-256
Once this is done, we have to provide encryption and decryption key for the password. As you know, AES is symmetric type of encryption which means it utilise the same key for encryption and decryption.
Create encryption/decryption key
[all servers]# echo 'some secret string' > ~/.pgpoolkey [all servers]# chmod 600 ~/.pgpoolkey
Encrypt the password
[all servers]# pg_enc -m -k /root/.pgpoolkey -u pgpool -p db password: [pgpool user's password] [all servers]# pg_enc -m -k /root/.pgpoolkey -u postgres -p db password: [postgres user's passowrd] # cat /etc/pgpool-II/pool_passwd pgpool:AESheq2ZMZjynddMWk5sKP/Rw== postgres:AESHs/pWL5rtXy2IwuzroHfqg==
Please be sure you have done that all servers and you have the: .pgpoolkey on all servers with PGpool on the home directory of the user, which runs the service. (In our case: postgres). Otherwise you will have the following error:
No .pgpoolkey available
SCRAM authentication failed unable to decrypt password from pool_passwd verify the valid pool_key exists
P.S. Be sure to restart the PGPool after :) or use pg_ctl to reload the hba files.
Check the configuration
We installed PGPool on top of existing replication, but PGPool can be used to restore and recover and thus create replication configuration itself. Let's follow, the process. Firstly, please create both files in the appendix on the following locations on postgresqlmaster: /var/lib/pgsql/10/data/recovery_1st_stage /var/lib/pgsql/10/data/pgpool_remote_start
Start the Pgpool service:
Start PGPool
[postgresqlmaster]# systemctl start pgpool.service
Restore the database using the VIP:
Start PGPool
# pcp_recovery_node -h 192.168.0.220 -p 9898 -U pgpool-n 1 Password: pcp_recovery_node -- Command Successful # pcp_recovery_node -h 192.168.0.220 -p 9898 -U pgpool -n 2 Password: pcp_recovery_node -- Command Successful
Startup
Start the PGPool
[all servers]# service pgpool start
Redirecting to /bin/systemctl start pgpool.service
[all servers]# service pgpool status
Redirecting to /bin/systemctl status pgpool.service
● pgpool.service - Pgpool-II
Loaded: loaded (/usr/lib/systemd/system/pgpool.service; disabled; vendor preset: disabled)
Active: active (running) since Mon 2020-01-27 12:45:33 EST; 3s ago
Process: 6190 ExecStop=/usr/bin/pgpool -f /etc/pgpool-II/pgpool.conf $STOP_OPTS stop (code=exited, status=0/SUCCESS)
Main PID: 6196 (pgpool)
CGroup: /system.slice/pgpool.service
├─6196 /usr/bin/pgpool -f /etc/pgpool-II/pgpool.conf -n
├─6198 pgpool: watchdog
├─6199 pgpool: lifecheck
├─6200 pgpool: wait for connection request
├─6201 pgpool: wait for connection request
├─6202 pgpool: wait for connection request
├─6203 pgpool: wait for connection request
├─6204 pgpool: wait for connection request
├─6205 pgpool: wait for connection request
├─6206 pgpool: wait for connection request
├─6207 pgpool: wait for connection request
├─6208 pgpool: wait for connection request
├─6209 pgpool: wait for connection request
├─6210 pgpool: wait for connection request
├─6211 pgpool: wait for connection request
├─6212 pgpool: wait for connection request
├─6213 pgpool: wait for connection request
├─6214 pgpool: wait for connection request
├─6215 pgpool: wait for connection request
├─6216 pgpool: wait for connection request
├─6217 pgpool: wait for connection request
├─6218 pgpool: wait for connection request
├─6219 pgpool: wait for connection request
├─6220 pgpool: wait for connection request
├─6221 pgpool: wait for connection request
├─6222 pgpool: wait for connection request
├─6223 pgpool: wait for connection request
├─6224 pgpool: wait for connection request
├─6225 pgpool: wait for connection request
├─6226 pgpool: wait for connection request
├─6227 pgpool: wait for connection request
├─6228 pgpool: wait for connection request
├─6229 pgpool: wait for connection request
├─6230 pgpool: wait for connection request
├─6231 pgpool: wait for connection request
├─6232 pgpool: PCP: wait for connection request
├─6233 pgpool: worker process
├─6234 pgpool: health check process(0)
├─6235 pgpool: health check process(1)
├─6236 pgpool: health check process(2)
├─6237 pgpool: heartbeat receiver
├─6238 pgpool: heartbeat sender
├─6239 pgpool: heartbeat receiver
└─6240 pgpool: heartbeat sender
Jan 27 12:45:35 postgresqlslavetwo pgpool[6238]: [10-2] 2020-01-27 12:45:35: pid 6238: DETAIL: set SO_REUSEPORT
Jan 27 12:45:35 postgresqlslavetwo pgpool[6237]: [9-1] 2020-01-27 12:45:35: pid 6237: LOG: set SO_REUSEPORT option to the socket
Jan 27 12:45:35 postgresqlslavetwo pgpool[6237]: [10-1] 2020-01-27 12:45:35: pid 6237: LOG: creating watchdog heartbeat receive socket.
Jan 27 12:45:35 postgresqlslavetwo pgpool[6237]: [10-2] 2020-01-27 12:45:35: pid 6237: DETAIL: set SO_REUSEPORT
Jan 27 12:45:35 postgresqlslavetwo pgpool[6239]: [9-1] 2020-01-27 12:45:35: pid 6239: LOG: set SO_REUSEPORT option to the socket
Jan 27 12:45:35 postgresqlslavetwo pgpool[6239]: [10-1] 2020-01-27 12:45:35: pid 6239: LOG: creating watchdog heartbeat receive socket.
Jan 27 12:45:35 postgresqlslavetwo pgpool[6239]: [10-2] 2020-01-27 12:45:35: pid 6239: DETAIL: set SO_REUSEPORT
Jan 27 12:45:35 postgresqlslavetwo pgpool[6240]: [9-1] 2020-01-27 12:45:35: pid 6240: LOG: set SO_REUSEPORT option to the socket
Jan 27 12:45:35 postgresqlslavetwo pgpool[6240]: [10-1] 2020-01-27 12:45:35: pid 6240: LOG: creating socket for sending heartbeat
Jan 27 12:45:35 postgresqlslavetwo pgpool[6240]: [10-2] 2020-01-27 12:45:35: pid 6240: DETAIL: set SO_REUSEPORT
[root@postgresqlslavetwo pgpool-II]#
Appendix
recovery_1st_stage
#!/bin/bash
# This script is executed by "recovery_1st_stage" to recovery a Standby node.
set -o xtrace
exec > >(logger -i -p local1.info) 2>&1
PRIMARY_NODE_PGDATA="$1"
DEST_NODE_HOST="$2"
DEST_NODE_PGDATA="$3"
PRIMARY_NODE_PORT="$4"
DEST_NODE_ID="$5"
DEST_NODE_PORT="$6"
PRIMARY_NODE_HOST=$(hostname)
PGHOME=/usr/pgsql-11
ARCHIVEDIR=/var/lib/pgsql/archivedir
REPLUSER=repl
logger -i -p local1.info recovery_1st_stage: start: pg_basebackup for Standby node $DEST_NODE_ID
## Test passwrodless SSH
ssh -T -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null postgres@${DEST_NODE_HOST} -i ~/.ssh/id_rsa_pgpool ls /tmp > /dev/null
if [ $? -ne 0 ]; then
logger -i -p local1.info recovery_1st_stage: passwrodless SSH to postgres@${DEST_NODE_HOST} failed. Please setup passwrodless SSH.
exit 1
fi
## Get PostgreSQL major version
PGVERSION=`${PGHOME}/bin/initdb -V | awk '{print $3}' | sed 's/\..*//' | sed 's/\([0-9]*\)[a-zA-Z].*/\1/'`
if [ $PGVERSION -ge 12 ]; then
RECOVERYCONF=${DEST_NODE_PGDATA}/myrecovery.conf
else
RECOVERYCONF=${DEST_NODE_PGDATA}/recovery.conf
fi
## Create replication slot "${DEST_NODE_HOST}"
${PGHOME}/bin/psql -p ${PRIMARY_NODE_PORT} << EOQ
SELECT pg_create_physical_replication_slot('${DEST_NODE_HOST}');
EOQ
## Execute pg_basebackup to recovery Standby node
ssh -T -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null postgres@$DEST_NODE_HOST -i ~/.ssh/id_rsa_pgpool "
set -o errexit
rm -rf $DEST_NODE_PGDATA
rm -rf $ARCHIVEDIR/*
${PGHOME}/bin/pg_basebackup -h $PRIMARY_NODE_HOST -U $REPLUSER -p $PRIMARY_NODE_PORT -D $DEST_NODE_PGDATA -X stream
if [ ${PGVERSION} -ge 12 ]; then
sed -i -e \"\\\$ainclude_if_exists = '$(echo ${RECOVERYCONF} | sed -e 's/\//\\\//g')'\" \
-e \"/^include_if_exists = '$(echo ${RECOVERYCONF} | sed -e 's/\//\\\//g')'/d\" ${DEST_NODE_PGDATA}/postgresql.conf
fi
cat > ${RECOVERYCONF} << EOT
primary_conninfo = 'host=${PRIMARY_NODE_HOST} port=${PRIMARY_NODE_PORT} user=${REPLUSER} application_name=${DEST_NODE_HOST} passfile=''/var/lib/pgsql/.pgpass'''
recovery_target_timeline = 'latest'
restore_command = 'scp ${PRIMARY_NODE_HOST}:${ARCHIVEDIR}/%f %p'
primary_slot_name = '${DEST_NODE_HOST}'
EOT
if [ ${PGVERSION} -ge 12 ]; then
touch ${DEST_NODE_PGDATA}/standby.signal
else
echo \"standby_mode = 'on'\" >> ${RECOVERYCONF}
fi
sed -i \"s/#*port = .*/port = ${DEST_NODE_PORT}/\" ${DEST_NODE_PGDATA}/postgresql.conf
"
if [ $? -ne 0 ]; then
${PGHOME}/bin/psql -p ${PRIMARY_NODE_PORT} << EOQ
SELECT pg_drop_replication_slot('${DEST_NODE_HOST}');
EOQ
logger -i -p local1.error recovery_1st_stage: end: pg_basebackup failed. online recovery failed
exit 1
fi
logger -i -p local1.info recovery_1st_stage: end: recovery_1st_stage complete
exit 0
pgpool_remote_start
#!/bin/bash
# This script is run after recovery_1st_stage to start Standby node.
set -o xtrace
exec > >(logger -i -p local1.info) 2>&1
PGHOME=/usr/pgsql-11
DEST_NODE_HOST="$1"
DEST_NODE_PGDATA="$2"
logger -i -p local1.info pgpool_remote_start: start: remote start Standby node $DEST_NODE_HOST
## Test passwrodless SSH
ssh -T -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null postgres@${DEST_NODE_HOST} -i ~/.ssh/id_rsa_pgpool ls /tmp > /dev/null
if [ $? -ne 0 ]; then
logger -i -p local1.info pgpool_remote_start: passwrodless SSH to postgres@${DEST_NODE_HOST} failed. Please setup passwrodless SSH.
exit 1
fi
## Start Standby node
ssh -T -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null postgres@$DEST_NODE_HOST -i ~/.ssh/id_rsa_pgpool "
$PGHOME/bin/pg_ctl -l /dev/null -w -D $DEST_NODE_PGDATA start
"
if [ $? -ne 0 ]; then
logger -i -p local1.error pgpool_remote_start: $DEST_NODE_HOST PostgreSQL start failed.
exit 1
fi
logger -i -p local1.info pgpool_remote_start: end: $DEST_NODE_HOST PostgreSQL started successfully.
exit 0